Sturtevant Richmont Global 400mp, User Manual

Page: 30 / 73

Global 400mp User Manual 30 of 72 v4.0
Chapter 3: Configuring the unit 17 August 2016
Socket discrete inputs. The socket cannot be the same for both the primary and holding tool
within a parameter.
Batch
Default: 1
Range: 1 to 255
This setting determines how many good tightenings must be performed in the parameter to
complete a batch.
Lock on batch
Default: no
This setting determines if the unit will lock or restart the parameter when a batch is completed.
When set to yes, the Global 400mp will stop when a batch is completed and transition to a no
active parameter state. When set to no, the Global 400mp will restart the parameter when a
batch is completed.
This setting is ignored when running the parameter as part of a job.
Click Tool Fields
Timer Min
Default: 0
Range: 0 to 2.55 seconds
This setting controls the minimum amount of time the tool must be held in the clicked position
for a valid tightening. This value must be less than Timer Max.
Timer Max
Default: 1.00 seconds
Range: 0 to 2.55 seconds
This setting controls the maximum amount of time the tool may be held in the clicked position
for a valid tightening. This value must be greater than Timer Min.
Time between cycles
Default: 0
Range: 0 to 9999 seconds
This setting controls the minimum amount of time after an accepted tightening before another
tightening should be accepted. Any additional tightenings performed within this time after an
accepted tightening will be automatically considered a reject.
Time between batches
Default: 0
Range: 0 to 9999 seconds