Sturtevant Richmont Global 400mp, User Manual, Page: 36 / 73

Global 400mp User Manual 36 of 72 v4.0
Chapter 3: Configuring the unit 17 August 2016
Subnet Mask
Default: 255.255.255.0
This setting controls the subnet mask for Ethernet networks.
Gateway
Default: 192.168.1.113
This setting controls the default gateway setting for Ethernet networks.
Use DHCP
Default: No
This setting determines if the Global 400mp will attempt to automatically acquire a network
address or if it will use the one entered manually. When set to yes, the IP Address, Subnet Mask,
and Gateway settings are ignored.
Unit Setup
The Unit Setup screen contains the settings for the overall unit.
Figure 35: Main menu – Unit Setup Figure 36: Unit Setup screen – page 1 Figure 37: Unit Setup screen – page 2
Function keys
1. NEXT – Goes to the other page of the unit setup screen.
2. DEFAULTS – Goes to the Reset Defaults screen
3. SAVE – Saves changes made to the Global 400mp configuration.
4. CANCEL [ESC] – Cancels changes made to the Global 400mp configuration.
Page 1
Global 400mp Name
The Global 400mp name can be up to 25 numbers, letters, or decimal points.
The Global 400mp name is sent to the network in the Controller Name field of various
commands.
Password
The password can be up to 10 numbers. The “password” shown on this screen is a placeholder
and does not necessarily represent the length of the actual password. To change the unit