manualshive.com logo in svg

Sturtevant Richmont Global 400mp, User Manual, Page: 68 / 73

Share
Download
Sturtevant Richmont Global 400mp User Manual Download Page 68

 

Global 400mp User Manual 

68 of 72 

v4.0 

Chapter 8: Data Management 

 

17 August 2016 

Upload USB file to device 

 

Figure 56: USB Menu - Upload 

 

Figure 57: USB Upload screen 

When entering the USB Upload screen, the unit will look in the root folder to find any available 
files to upload.  Make sure you have no more than one file of a given type on the USB drive, as 
the unit does not provide a way to select between multiple files of a given type. 

Soft keys 

1.

 

UPLOAD ALL – Uploads all files from the USB drive. 

2.

 

No function 

3.

 

UPLOAD – Uploads the selected files from the USB drive. 

4.

 

CANCEL [ESC] – Returns to the USB Menu screen. 

Available Files 

Firmware 

Firmware files have the extension “.bec”.  If a file is found, the unit will validate the file before 
uploading it.  If a firmware file is uploaded, the unit will reprogram itself with the new firmware 
and reboot. 

Configuration 

Configuration files have the extension “.g4m”.  If a file is found, the unit must validate the file 
before uploading it.  These files can be created by downloading from a Global 400mp or by 
saving a configuration file from the PC application.  This file contains all the configuration 
settings for the unit, including tools, parameters, jobs, and Global 400mp and network settings.  
When uploading the configuration, all existing settings will be overwritten with the new values.  
New tools referenced in the configuration file will need to be associated with the Global 400mp, 
as if learning them to the unit.  
 

Summary of Contents for Global 400mp










































































Reviews:

No comments