manualshive.com logo in svg

Sturtevant Richmont Global 400mp, User Manual, Page: 28 / 73

Share
Download
Sturtevant Richmont Global 400mp User Manual Download Page 28

 

Global 400mp User Manual 

28 of 72 

v4.0 

Chapter 3: Configuring the unit 

 

17 August 2016 

Parameters 

Selecting Parameters 

 

Figure 21: Main menu – Parameters 

 

Figure 22: Select Interface screen 

 

Figure 23:Choose Parameter screen 

Function keys 

1.

 

SELECT – Select the currently highlighted parameter to run.  Only available for selectable 
parameters. 

2.

 

EDIT – Edit the currently highlighted parameter. 

3.

 

COPY – Selects the currently highlighted parameter to be copied to another location. 

4.

 

RETURN [ESC] – Returns to the main menu. 

The Choose Parameters and Jobs screen shows all the parameters and jobs for an interface.  Only 
the parameters with tools assigned will show their numbers on the grid.  A selectable parameter 
will have a black number.  A defined, but not selectable, parameter will be shown in red.  A 
parameter is defined when a tool number is assigned to it. 
A defined parameter will be unable to be selected in a few circumstances: 

•

 

The assigned tool number is an empty tool slot, because either no tool was ever learned 
or the previous tool was forgotten 

•

 

The assigned tool is assigned to another interface 

•

 

The parameter configuration is invalid 

Configuration Options 

The configuration options for a parameter depend on the type of tool selected for the parameter. 

Summary of Contents for Global 400mp










































































Reviews:

No comments