manualshive.com logo in svg

Sturtevant Richmont Global 400mp, User Manual, Page: 26 / 73

Share
Download
Sturtevant Richmont Global 400mp User Manual Download Page 26

 

Global 400mp User Manual 

26 of 72 

v4.0 

Chapter 3: Configuring the unit 

 

17 August 2016 

Last Calibration 

This field is used to store the date when the tool was last calibrated.  The display order of this 
field is: 

year-month-day  hour:minute:second 

For digital tools, this field is reported by the tool and must be updated in the tool instead of 
edited in the Global 400mp. 
For other tools, this field must be updated manually when the tool is calibrated and is for 
informational purposes only.  The date can be set to the current time in the Global 400mp by 
selecting 

Set Now

 at the end of the Last Calibration row and pressing the ENT key. 

Next Calibration 

This field is used to store the date at which the tool should be recalibrated.  The display order of 
this field is: 

year-month-day  hour:minute:second 

For digital tools, this field is reported by the tool and must be updated in the tool instead of 
edited in the unit. 
For other tools, this field must be updated manually when the tool is calibrated.  The date can be 
set to the current time in the Global 400mp by selecting 

Set Now

 at the end of the Next 

Calibration row and pressing the ENT key.  This can be helpful when the recalibration period is a 
full month because you will only need to update the month (and year when at the end of the 
year). 
The tool can be configured via the PC software application to reject all results after this date 
passes. 

Cycles 

This field tracks the total number of cycles performed by the tool since the tool radio was 
connected to the Global 400mp.  This cycle count is incremented for both accepted and rejected 
cycles. 
This field cannot be edited.  If the radio connected is erased and then is reconnected to a Global 
400mp, the cycle count will restart at 0. 

Last PM at 

This field stores the cycle count at which the tool last received preventative maintenance.  This 
field must be updated manually when the tool is serviced.  The count can be set to the current 
cycle count by selecting 

Set Now

 at the end of the row and pressing the ENT key. 

Cycles before PM 

Range: 0 to 4,294,967,295 
This field indicates the number of cycles between preventative maintenance for the tool.  If this 
field is set to 0, no tracking of cycle counts for preventative maintenance is performed. 

Summary of Contents for Global 400mp










































































Reviews:

No comments