Sturtevant Richmont Global 400mp, User Manual

Page: 47 / 73

Global 400mp User Manual 47 of 72 v4.0
Chapter 4: 17 August 2016
7. Identifier part 3
This command sets the Identifier part 3 (VIN characters 51-75) reported by the unit in tightening
result messages and the ACOP MID 0152 Multiple identifier and result parts notifications.
Data: up to 25 characters
Example:
*%07%GU49CN53%*
8. Identifier part 4
This command sets the Identifier part 4 (VIN characters 76-100) reported by the unit in
tightening result messages and the ACOP MID 0152 Multiple identifier and result parts
notifications.
Data: up to 25 characters
Example:
*%08%RU39CN53%*
10. Reset batch count
This command resets the count of all currently running parameters on the unit.
Data: none
Example:
*%10%%*
11. Start Parameter
This command instructs the unit to start a parameter. Any other running parameter or job will be
stopped before starting the new parameter.
Data: number of up to 3 digits specifying the parameter number to select (1-100)
Example:
*%11%73%*
This bar code would select parameter 73.
13. Stop
This command instructs the unit to stop any running parameter or job.
Data: none
Example:
*%13%%*
30. Reset parameter batch count
This command resets the count of the specified parameter. If the specified parameter is not
running, this bar code is ignored.