Sturtevant Richmont Global 400mp, User Manual, Page: 34 / 73

Global 400mp User Manual 34 of 72 v4.0
Chapter 3: Configuring the unit 17 August 2016
1. DELETE – Deletes all information in the job and returns to the Choose Job screen.
2. STEPS – Goes to the Job Step Select screen
3. SAVE – Saves changes to the job and returns to the Choose Job screen
4. CANCEL [ESC] – Discards changes to the job and returns to the Choose Job screen
Name
The job name can be up to 25 numbers, letters, or decimal points.
The job name is shown on screen when running the job but is not sent to the network.
Number of Steps
Shows the number of steps currently defined in the job.
Lock on done
Default: no
This setting determines if the unit will lock or restart the job when the job is completed. When
set to yes, the Global 400mp will stop when the job completes and transition to a no active
parameter state. When set to no, the Global 400mp will restart the job when it completes.
Batch beep on
Default: Job
Values: Job, Parameter
This setting determines if the unit will sound the batch beep for each parameter in the job or only
when the entire job is completed. The UI will show the batch color for each individual
parameter when it completes regardless of this setting.
Job Step Selection
Figure 31: Job Step Select screen
Function keys
1. 11-20 – Shows steps 11-20 of the job. When steps 11-20 are showing, this key changes to
“21-30”. When steps 21-30 are showing, this key changes to “1-10”.
2. No function
3. No function
4. RETURN [ESC] –Returns to the Job Edit screen