manualshive.com logo in svg

Sturtevant Richmont Global 400mp, User Manual, Page: 70 / 73

Share
Download
Sturtevant Richmont Global 400mp User Manual Download Page 70

 

Global 400mp User Manual 

70 of 72 

v4.0 

Chapter 9: Firmware Updates 

 

17 August 2016 

1.

 

If the firmware update file was emailed to you, put it on a USB drive, in the root folder of the 
drive.  If you received the firmware update already on a USB drive, proceed to step 2. 

2.

 

Turn on power to the unit and let it go through the startup process. 

3.

 

Insert the USB drive into the connector on the unit. 

4.

 

Wait for the unit to detect the USB drive. (This may take several seconds.)  When the drive is 
detected, you should see the USB menu. 

 

If the unit does not detect the drive, contact support.  If the update was emailed to you, you 
may also try another USB drive. 

5.

 

To upload the update to the unit, press the down arrow followed by ENT to go to the USB 
Upload screen. 

 

6.

 

When the unit changes to the upload screen, it will search the root folder of the drive for the 
firmware update.  If no valid update file is found, the screen will show an error.  Otherwise, 
press the right arrow to select the firmware update and then 

UPLOAD

 to start the upload. 

7.

 

When the upload is complete, the unit will restart.  At this point, you may remove the USB 
drive. 

Summary of Contents for Global 400mp










































































Reviews:

No comments