Stryker Stretcher ST1, Operation Manual, Page: 29 / 888

LLooccaattiinngg tthhee ppaattiieenntt rreessttrraaiinntt ssttrraapp ttiiee--iinnss
W WAARRNNIINNG G
• Always use caution when you attach restraint straps. Patient or operator injury may occur. Physical restraints, even if
secured, may result in serious harm to patients and operators, including entanglement, entrapment, physical injury, or
death.
• Always attach restraint straps or devices only at the identified attachment points of the product. Failure to do so may
result in patient or operator injury. Do not attach restraint straps to the siderail.
• Always refer to applicable state and federal restrictions and regulations and the appropriate facility protocols before you
use any restraint strap or device.
There are eight patient restraint strap tie-in locations on the litter assembly to attach the patient restraint straps (Figure 15
or Figure 16).
FFiigguurree 1155 –– NNoonn--XX--rraayy ooppttiioonn rreessttrraaiinntt ssttrraapp llooccaattiioonnss
FFiigguurree 1166 –– XX--rraayy ooppttiioonn rreessttrraaiinntt ssttrraapp llooccaattiioonnss
NNoottee -- Restraint straps are Type B applied parts.
IInnsseerrttiinngg oorr rreem moovviinngg XX--rraayy ccaasssseetttteess
W WAARRNNIINNG G
• Always refer to applicable state and federal restrictions and regulations for safety before you use the X-ray option with
radiation generating devices. Radiation generating devices may produce residual, stray, or scattered radiation.
• Always use caution when you take X-rays with the Fowler backrest in the upright position or when you use a lateral
cassette.
The X-ray option provides both an articulating radiographic support surface and a platform below the patient support
surface for X-ray cassette placement. Working with medical X-ray systems, the radiographic support surface allows the
capture of clinical X-rays (AP full body, optional full body lateral, and optional upright chest) while the patient is on the
product. You can insert cassettes from the head end, foot end, and either side of the product.
To insert an X-ray cassette:
1. Center the patient on the product with the position indicator labels located on all sides of the product (Figure 17).
2. Insert an X-ray cassette below the patient surface.
KK-6300 Rev 00 25 EN