Stanford Research Systems SR780, Operating Manual And Programming Reference

Page: 418 / 497

5-52 Input Commands
SR780 Network Signal Analyzer
I2CP (?) {i}
The I2CP command sets (queries) the Ch2 Input Coupling. The parameter i
selects DC (0), AC (1) or ICP (2).
I2RG (?) {i}
The I2RG command sets (queries) the Ch2 Input Range. The parameter i ranges
from -50 to +34 (dB) and must be even. If Ch2 AutoRange is On, the I2RG i
command will turn Ch2 AutoRange Off and set the Ch2 Range to i.
I2AR (?) {i}
The I2AR command sets (queries) the Ch2 AutoRange Mode. The parameter i
selects Normal (0) or Tracking (1).
A2RG (?) {i}
The A2RG command sets (queries) the Ch2 AutoRanging Off/On. The parameter
i selects Off (Manual) (0) or On (AutoRanging) (1). If i=1 and Ch2 AutoRange is
already On, a new AutoRange is performed.
I2AF (?) {i}
The I2AF command sets (queries) the Ch2 Anti-Aliasing Filter Off/On. The
parameter i selects Off (0) or On (1).
I2AW (?) {i}
The I2AW command sets (queries) the Ch2 A-Weighting Filter Off/On. The
parameter i selects Off (0) or On (1).
IAOM (?) {i}
The IAOM command sets (queries) the Input Auto Offset Off/On. The parameter
i selects Off (0) or On (1).
EU1M (?) {i}
The EU1M command sets (queries) the Ch1 Engineering Units Mode. The
parameter i selects Off (0) or On (1).
EU1L (?) {i}
The EU1L command sets (queries) the Ch1 Engineering Units Label. The
parameter i selects the unit label.
i Label i Label
0 m/s
2
8 kg
1 m/s 9 lbs
2 m 10 N
3 in/s
2
11 dyne
4 in/s 12 Pas
5 in 13 bar
6 mil 14 USER
7 g