manualshive.com logo in svg

Stanford Research Systems SR780, Operating Manual And Programming Reference

Share
Download
Stanford Research Systems SR780 Operating Manual And Programming Reference Download Page 308

4-126 Waterfall Menu 

SR780 Network Signal Analyzer 

Record to Trace     

Save a single record or measurement from the waterfall to a Trace. <Record to Trace> 
saves the record selected by the marker to a Trace. Choose a Trace with the knob and 
press [Enter] to complete the operation. 

A stored trace can be recalled to a Display or Reference Display, used in a User Math 
Function, saved to disk, or copied to the Arbitrary Waveform buffer. 

When the measurement is paused, use [Alt] knob to move the marker from record to 
record (in the Z axis) and scroll the display through the waterfall memory. Use the knob 
without [Alt] to move the marker along the X axis within a record. 

Command: WTRC (?) d, i, j 

Slice to Trace     

Save a time ‘slice’ from the waterfall to a Trace. A slice is the history of a single X 
position (data at the marker X position from all stored records). Choose a Trace with the 
knob and press [Enter] to complete the operation. 

The stored slice contains as many points as were stored in the Waterfall buffer (up to 
Total Count). The points in a slice trace are numbered and displayed from 0 (data from 
oldest record) to n (data from newest record). Note that this differs from the waterfall 
display in which the newest record is numbered 0. A recalled slice resemble a time record 
(X axis is time advancing left to right) with the X axis labeled as waterfall record number 
(instead of time). 

A stored slice trace can be recalled to a Display or Reference Display, used in a User 
Math Function or saved to disk. A slice can not be copied to the Arbitrary Waveform 
buffer. 

Command: WSLC (?) d, i, j 

Summary of Contents for SR780


















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands