Stanford Research Systems SR780, Operating Manual And Programming Reference

Page: 398 / 497

5-32 Display Setup Commands
SR780 Network Signal Analyzer
Octave Group
i Measurement
21 Octave 1
22 Octave 2
23 Capture 1
24 Capture 2
25 Octave User Function 1
26 Octave User Function 2
27 Octave User Function 3
28 Octave User Function 4
29 Octave User Function 5
Swept Sine Group
i Measurement
30 Spectrum 1
31 Spectrum 2
32 Cross Spectrum
33 Transfer Function
34 Swept Sine User Function 1
35 Swept Sine User Function 2
36 Swept Sine User Function 3
37 Swept Sine User Function 4
38 Swept Sine User Function 5
A measurement should be setup by first choosing the Measurement Group, then
the Measurement, then the View, then the Units. Finally, the display scale and
references should be set.
VIEW (?) d {, i}
The VIEW command sets (queries) the View of display d. The parameter i
selects the view from the list below.
Each view has associated units. Changing the View changes the Units to the units
last used with the new view.
i View
0 Log Magnitude
1 Linear Magnitude
2 Magnitude Squared
3 Real Part
4 Imaginary Part
5 Phase
6 Unwrapped Phase
7 Nyquist
8 Nichols
A measurement should be setup by first choosing the Measurement Group, then
the Measurement, then the View, then the Units. Finally, the display scale and
references should be set.