Stanford Research Systems SR780, Operating Manual And Programming Reference

Page: 329 / 497

Disk Menu 4-147
SR780 Network Signal Analyzer
The entire instrument setup is stored to the file. Portions of the setup may be excluded
from the recall.
Command: SSAV
Recall Settings
Display the Recall Settings menu. Choose the portions of the setup to recall from the
Current File in the Current Directory. The recalled settings become effective
immediately.
Press [Disk] again to return to the main Disk menu.
Command: SRCL i
Trace to Disk
Save Trace data to the Current File in the Current Directory. If the Current File has no
specified extension, the default extension .78D is used.
Select a Trace # (1..5) with the knob and press [Enter] to save it to disk. Only traces
which currently have data in them may be selected. To save a display to a Trace, use
[Display to Trace] ([Alt] [Print Screen]).
Command: TSAV i
Disk to Trace
Recall data from the Current File in the Current Directory to a Trace. If the Current File
has no specified extension, the default extension .78D is used.
Select a Trace # (1..5) with the knob and press [Enter] to recall from disk to the Trace.
The recalled data will replace any data presently stored in the Trace.
A stored trace can be recalled to a Display or Reference Display, used in a User Math
Function or saved to disk.
Command: TRCL i
Buffers
Display the Disk Buffers menu. Press <Return> or [Disk] for the main Disk menu. The
Disk Buffers menu loads traces from disk files. It also loads and saves Capture, Arbitrary
Source and Waterfall data buffers to disk.