Stanford Research Systems SR780, Operating Manual And Programming Reference

Page: 318 / 497

4-136 Limit Testing Analysis Menu
SR780 Network Signal Analyzer
Clear Limits
Clear the Limit Segments for the active display. All limit segments are cleared and Limit
Testing is turned Off.
Command: LCLR d
Edit Limits
Display the Edit Limits menu. Press <Return> for the <Limit Test> menu. Choosing this
menu also Shows Limit Segments.
New Segment
Add a new segment to the Limit Test for the active display. The new segment starts at the
end of the last existing segment. This simplifies the building of a continuous limit table.
The new segment is also the Current Segment.
Command: LMAX (?) d {, i}
Limit Type
Select the Limit Type for the Current Segment [Upper, Lower]. Each segment is
identified by small triangular arrow markers at the segment end points. These markers are
above the segment and point downwards for Upper limits. They are below the segment
and point upwards for Lower limits.
Command: LSEG (?) d, i {, j, x0, y0, x1, y1}