manualshive.com logo in svg

Sound Devices 788T, User Manual And Technical Information

Share
Download
Sound Devices 788T User Manual And Technical Information Download Page 90

White/Green/Red

 

This is the Factory Default setting. The backlight will illuminate White in Standby, Green during 
Playback, and Red during Recording. 

Red on Record Only

 

The LCD backlight will illuminate Red during Recording and White for Standby and Playback..

Green on Play Only

The LCD backlight will illuminate Green during Playback and White for Standby and Record..

White Only

The LCD backlight will remain White at all times. 

Time Display and Record Indication 

The position of the A-time numbers and time code numbers can be exchanged in the Setup Menu op-
tion 

TIME CODE: DISPLAY MODE

. When Big Time Code is selected, the time code value is displayed 

in the main numeric display. If time code is turned Off, the A-time is displayed as large numbers, 
even when Big Time Code is selected. 

reversed numbers indicating that recording is active

To provide for additional visual indication that recording is in process, the big numerals can 
be set to reverse contrast or to fl ash during record. This is selected in the Setup Menu option 

REC: RECORD INDICATOR

. 

CL-2 Metering and Display 

The CL-2 is an optional one channel remote fader for the 788T. The CL-2 displays Post-Fade Signal 
activity, Post-Fade Limiting activity, Media Activity status, Input Solo, Input Mute status, and Record 
status. 

See CL-2 Remote Fader for more details.

CL-8 Metering and Display 

The CL-8 is an optional mixing control surface for the 788T. The CL-8 displays Post Fade Signal 
Activity, ost-Fade Limiting activity, Left/Right track routing, Aux 1/Aux 2 track routing (pre or post 
fade), Input Limiter status, Input Polarity status, High-Pass Filter status, and Solo status. 

See CL-8 

Controller for more details.

CL-9 Metering and Display 

The CL-9 is an optional Linear Fader Controller for the 788T. The CL-9 displays Pre-Fade Signal 
Activity, Pre- and Post-Fade Limiting activity, Input-to-Track routing, Input/Output/Track Solo and 
Mute status, Track Arming status, and much more. 

See CL-9 Linear Fader Controller section for more 

details. 

788T/788T-SSD User Guide and Technical Information

82

v. 3.01 

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Monitoring and Me

tering

7

Summary of Contents for 788T





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands