manualshive.com logo in svg

Sound Devices 788T, User Manual And Technical Information

Share
Download
Sound Devices 788T User Manual And Technical Information Download Page 107

Remote Control

The 788T provides remote control functionality using a USB keyboard, Logic Input/Output via the 
rear panel DE-15 connector, the Sound Devices CL-1 Remote Roll Accessory, Sound Devices CL-2 
Remote Fader, the Sound Devices CL-8 Controller, the CL-9 Linear Fader Controller, and Sound 
Devices Wave Agent.  

The USB Keyboard Input is available to plug in a standard USB keyboard to control the 788T. Front 
panel controls and menu selections on the 788T can be mapped to keyboard shortcuts, allowing for 
full keyboard control of the recorder. Sound Devices has tested and recommends the following USB 
keyboards: 

•  A4Tech KL-5UP (http://www.a4tech.com)
•  Kensington K64366 (http://us.kensington.com)
• Adesso ACK-595U (http://www.adesso.com)

Keyboards with internal USB hubs do not function with the 788T. 

Keyboard Assignments

Menu Keys

Standard keyboard shortcuts have been pre-assigned and are listed below.

Shortcut Key

Function

Escape

Cancel – Exits without saving in all menus

Enter

Ok – Saves and exits in all menus (Check Mark or Edit)

Up Arrow

Mirrors the LCD Up Arrow in all menus

Down Arrow

Mirrors the LCD Down Arrow in all menus

Left Arrow

Mirrors the LCD REWIND Arrow in all menus
Custom Route User Interface – Un-assign Route
Time Menu – Moves to previous field

Right Arrow

Mirrors the LCD FAST FORWARD Arrow in all menus
Custom Route User Interface – Assign Route.
InRoute User Interface – Edit if on ‘Custom Route’
File User Interface – Selects Options for Folders/Files when displayed
Shortcut Edit User Interface – Edit shortcut if on shortcut number
Scene/Track Lists – Edits (Same as pressing the Play key)
Time Menu – Moves to next field.

CTRL + Up Arrow

Setup User Interface Menu: Moves to the previous category

CTRL + Down Arrow

Setup User Interface Menu: Moves to the next category

Page Up

Setup User Interface Menu: Moves to the previous category or marker

Page Down

Setup User Interface Menu:- Moves to the next category or marker
Shortcut Edit User Interface Menu: Same as Enter

Menu

Enters the Setup Menu

Home

Setup User Interface Menu: Moves to the top of the list.
File User Interface: Moves to the top of the list
Shortcut Edit User Interface : Goes to first shortcut number or Hot Key
String User Interface: Goes to the beginning of the string

End

Setup User Interface Menu: Moves to the bottom of the list.
Shortcut Edit User Interface: Goes to last shortcut number or Hot Key
String User Interface: Goes to the end of the string being edited

9

R

emote Control

9

788T/788T-SSD User Guide and Technical Information

99

Summary of Contents for 788T





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands