manualshive.com logo in svg

Sound Devices 788T, User Manual And Technical Information

Share
Download
Sound Devices 788T User Manual And Technical Information Download Page 30

Take List Descriptions 

To access the Take List press the HDD key or select Setup Menu option 

FILE: VIEW TAKE LIST

. 

From the Take List view and edit metadata across all storage mediums. 

7

9

8

10

6

1

2

4

5

3

1) 

Current/Last Take

The * (asterisk) indicates the current take 

being recorded or the last take to have 
been recorded by the 788T.

2) 

Next Take

The n indicates the name of the next take 
to be recorded. With the n take high-
lighted the user can make notes entry or 
increment/decrement Scene and Take for 
the next fi le to be recorded. 

3) 

Take Name Column

This is a sequential list of Takes recorded 
by the 788T fi rmware revision 1.5+. 

4) 

Next File Destination

Displays folder destination for the next 
Take to be recorded. 

5) 

Additional File Information

Displays additional fi le information, the 
following information can be toggled 
through by pressing in on the Rotary 
Switch: Beginning Time Code Stamp, 
Time of File Creation, Date of File Cre-
ation, Scene Names, Drives Containing 
the File, and Folder that Contains the File. 

6) 

DRV (Drive Directory)

Press the soft Drive (HDD) key to access 
the Drive Directory (File Viewer).

7) 

RENAME

Press the soft RENAME (Rewind) key to 
access the fi le/metadata rename window. 

8) 

EDIT

Press the soft EDIT (Play) key to access 
the Take Edit Menu. From this menu, 
make notes entries and view/edit the fol-
lowing metadata at anytime for any take: 
Notes, Rename, Circle, Project, Scene, 
Take, Tape (Roll), Set/Clear Copy, Delete 
(sends fi le to the Trash), and Rename 
Tracks. 

9) 

NOTES

Press the soft NOTES (Fast Forward) key 
to quickly access the Notes fi eld. 

10) 

X Exit

Exits to the previously viewed window.

788T/788T-SSD User Guide and Technical Information

22

v. 3.01 

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

P

anel and L

CD Descriptions

2

Summary of Contents for 788T





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands