manualshive.com logo in svg

Sound Devices 788T, User Manual And Technical Information, Page: 67 / 180

Share
Download
Sound Devices 788T User Manual And Technical Information Download Page 67

7.  Press the soft Check Mark (Tone) key to send the take to the Trash Folder. 

Load Settings

User Settings can be recalled from any take recorded by the 788T post fi rmware revision post 2.18. 

See Saving and Recalling User Settings

Renaming Tracks

Track names can be renamed during and after recording via the Take List. To rename a track: 

1.  Enter the Take List by pressing the 

 HDD key.

2.  Highlight the desired take to be edited.

3.  Press the soft EDIT (PLAY) key to access the Take Edit Menu.

4.  Highlight and select the track that is to be renamed. 

5.  Rename the track and press the soft Check Mark (TONE) key to save the new track name. 

Wave Agent Metadata Entry and Editing

Sound Devices Wave Agent Control Mode allows a Sound Devices 788T or 788T-SSD to be connected 
to Wave Agent over USB. When connected, Wave Agent can be used to enter or edit various meta-
data fi elds for the previous, current, and upcoming takes.

 See Wave Agent Control for details

.

CL-WiFi Metering and Display

With a CL-WIFI accessory connected to the C. Link in jack, an ad-hoc wireless connection can be es-
tablished between the 788T and any Apple iOS device. The CL-WiFi application running on the iOS 
devices can be used to enter or edit various metadata fi elds for the previous, current, and upcoming 
takes.

 See CL-WIFI for details.

CSV Sound Reports 

The 788T can generate sound reports as a comma separated values (CSV) fi le. CSV fi les can be 
opened and edited by common text editors and spreadsheet applications such as Microsoft Excel, 
OpenOffi ce Calc, Apple Numbers, Google Docs. 

Sound Report Setup

A sound report consists of two sections: A Take List section which provides information for each 
take in the folder the sound report was generated in, and an Overview section that contains ancillary 
information to the Take List section. The Overview section is fi rst, followed by the Take List section. 

R

ecording and Playbac

k

5

788T/788T-SSD User Guide and Technical Information

59

Summary of Contents for 788T





















































































































































































Reviews:

No comments