manualshive.com logo in svg

Sound Devices 788T, User Manual And Technical Information

Share
Download
Sound Devices 788T User Manual And Technical Information Download Page 18

Front Panel Descriptions cont.

1

2

3

4

5

6

7

8

788T

A
B

C
D
E
F

BFS

d

0

IN CF EX

ARM

ARM

BFS

d

0

INPUT

PWR

MENU

HDD

REC

R

L

1

13

14

15

16

17

18

19

20

21

6

10

11

12

7

8

2

4

9

5

3

18) 

Media Activity LEDs 

Indicates storage media activity. IN 
(internal drive), CF (CompactFlash), EX 
(external FireWire device). The LED illu-
minates green when the storage media is 
ready, illuminates yellow when the stor-
age media is writing/reading and while 
connected to a computer, and illuminates 
red when the storage media has encoun-
tered an error or if the drive has less than 
one minute of recording time left. 

19) 

Stop/Pause Key 

Momentarily press and hold this key to 
stop recording. In playback mode, a sin-
gle press pauses playback (play-pause), 
allowing audio scrubbing with the FF 
and REW keys. Another press of the key 
enters play-stop mode where the FF and 
REW keys select fi les for playback from 
the current directory, the fi lename and 
time display fl ash to indicate that a new 
fi le has been selected. One more press of 
the key exits playback mode. 
Pressing the STOP key whilst in stop 
mode displays the name of the next fi le 
to be recorded in the LCD. In the Setup 
Menu the STOP key is also used to exit 
from any menu, returning to the main 
display.

20) 

Record Key 

Press to begin recording. The 788T is a 
record-priority device; pressing this key 
starts recording and discontinues all other 
functions, except fi le operations. The REC 
key will illuminate red when the 788T is 
actively recording. If the selected storage 
media is not ready to begin recording a 
new fi le, the REC key will fl ash red until 
the recording has begun. Pressing the 
REC key during recording can set a cue 
marker, start a new fi le, as selected in the 
Setup Menu. 

21) 

Record LED 

Illuminates red when record mode is ac-
tive.

788T/788T-SSD User Guide and Technical Information

10

v. 3.01 

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

P

anel and L

CD Descriptions

2

Summary of Contents for 788T





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands