manualshive.com logo in svg

Sound Devices 788T, User Manual And Technical Information

Share
Download
Sound Devices 788T User Manual And Technical Information Download Page 173

Accessories

Several high-value accessories are available for the 788T, including a production case, cables, and 
power accessories. For a full list of Sound Devices products and accessories, visit our web site 

www.sounddevices.com/products

. 

Included Accessories 

The accessories below are included with the 788T/788T-SSD: 

•  XL-WPH3 - Universal In-Line Power Supply, 100–240 VAC input, 12 VDC, 45 W output 
•  XL-B2 - Li-ion removable rechargeable battery, 4600 mAh 
•  XL-RJ - C. Link cable
•  CS-MAN - Padded man-bag

Optional Accessories

CL-9

Linear Fader Controller for Sound Devices 788T recorder. Features 
eight 100 mm linear faders, quick access to many of the recorder’s 
parameters and exclusive access to EQ, Pan, Slate Mic, and two pri-
vate talk back systems. Connects to the 788T over USB. No additional 
powering required.

CL-8 

Mixing control surface for Sound Devices 788T recorder. Features large 
rotary faders and push buttons to control input routing, setup control, 
and access to the 788T Slate Mic. Connects to the 788T over USB.

CL-1 

Remote Control and Keyboard Interface used to control the 788T’s 
record start and stop functions using a toggle switch. Allows user to 
connect a PS/2 keyboard for control and metadata entry.  

CL-2

Remote 30 mm linear fader for the 788T Digital Recorders. Mounts 
directly to most boom poles. Equipped with four programmable Logic 
switches. Connects to the 788T over C.Link.

CS-5

Production case with high-quality strap for use with the 552 with 
integrated accessory compartment and NP-type battery compartment. 
Built for Sound Devices by CamRade.

CS-W

Removable accessory case for the CS-5 Production Case. Designed to 
hold wireless transmitters and receivers. Built for Sound Devices by 
CamRade.

CS- MAN

Convenient, padded carry/storage case with handles, handy to store 
wallets, keys and mobile phones; handcrafted in China.

13

Accessories

13

788T/788T-SSD User Guide and Technical Information

165

Summary of Contents for 788T





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands