manualshive.com logo in svg

Sound Devices 788T, User Manual And Technical Information

Share
Download
Sound Devices 788T User Manual And Technical Information Download Page 116

Configuring Apple iOS Wi-Fi Settings 

In order for the CL-WiFi application to communicate with the 788T, a device-to-device (ad-hoc) net-
work connection must be established between the CL-WIFI and the Apple iOS device.

1.  Make certain the the CL-WIFI interface is connected to the 788T, con

fi

 gured, powered on, and 

within range. 

see Connecting the CL-WIFI and Con

fi

 guring the CL-WIFI

.

2.  Enter the iOS Se

tt

 ings screen and then touch the Wi-Fi bu

tt

 on to con

fi

 gure the device’s wire-

less se

tt

 ings.

3.  If Wi-Fi is set to “O

ff

 ”, touch the bu

tt

 on to turn it on and wait for a list of available Wi-Fi ac-

cess points.

4.  Touch the access point in the list that has the SSID of the CL-WIFI interface. If no WEP se-

curity has been enabled on the CL-WIFI, skip to step 5. If WEP security has been enabled on 
the CL-WIFI, you will be prompted for the 10-character passphrase that was entered when 
con

fi

 guring the CL-WIFI. See 

Con

fi

 guring the CL-WIFI.

788T/788T-SSD User Guide and Technical Information

108

v. 3.01 

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

R

emote Control

9

Summary of Contents for 788T





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands