manualshive.com logo in svg

Sound Devices 788T, User Manual And Technical Information

Share
Download
Sound Devices 788T User Manual And Technical Information Download Page 26

11) 

Mix Assist

The highlighted selection shows 
whether or not the input is automixed. 
This option will be crossed out when 

MIXASSIST: MODE

 is set to Off. Automix 

is toggled on and off using the Rewind 
key. 

See Mix Assist

The following screen appears if the select Input is linked as a stereo pair. 

 

12

The following screen appears if the select Input gain pot is switched to the Off position. 

 

13

12) 

Panning Control

If the Input selected is a linked stereo pair, 
the odd numbered inputs will display 
gain and the even numbered inputs will 
display the stereo image. 

13) 

Channel Is Powered Down

The Input Settings Window cannot be ac-
cessed if the Input’s Gain Pot is switched 
to Off.

Track Setup Window

The Track Setup Window allows a user to record enable or disable tracks, route inputs-to-tracks, 
adjust master gain levels, and route tracks-to-media. Press the front panel INPUT key to access the 
Track Setup Window. There are four views of the Track Setup Window, Track Level Meters View, 
Track Routing View, Master Gain Levels View, and Media-to-Track View. The Track Meters View is 
always the fi rst view to appear upon entry of the Track Setup Window. Items that appear in all views 
have identical functionality.

788T/788T-SSD User Guide and Technical Information

18

v. 3.01 

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

P

anel and L

CD Descriptions

2

Summary of Contents for 788T





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands