manualshive.com logo in svg

Sound Devices 788T, User Manual And Technical Information

Share
Download
Sound Devices 788T User Manual And Technical Information Download Page 170

Inputs/Outputs – Digital 

AES3

Balanced AES out 1-4 on TA3 connector; Balanced AES out 5-6 on DE-15 connector110 ohm, 2 V p-p, AES and S/
PDIF compatible with RCA adaptor Balanced AES in 1-8 on DE-15 connector110 ohm, 2 V p-p, AES and S/PDIF 
compatible with RCA adaptor

AES42

AES42 Mode 1 operating system, pr10 V Digital Phantom Power to Digital Input pairs (menu-selectable).

Digital Storage 

Internal Drive 

788T - SATA interface 2.5-in hard drive 4200–7200 RPM supported, FAT32 formatted, up to 2 TB 
addressable 

788T-SSD - SATA interface 2.5-in Solid State Drive, FAT32 formatted, up to 2 TB addressable 

CompactFlash  

CF type I, II, and + (microdrive) compatible, UDMA (x300) compatible, FAT32 formatted, up to 
2TB addressable. 

File Types 

Record: WAV (AES-31 format), mono or polyphonic, at supported Fs, 24-bit or 16-bit 
Playback: WAV (AES-31 format), mono or polyphonic, at supported Fs, 24-bit or 16-bit 
MP3 @ 32, 64, 96, 128, 160, 192, 256, or 320 kb/s stereo
MP2 @ 64, 96, 128, 160, 192, 256, or 320, 384 kb/s stereo 

Utilities

 

Format for internal drives, CompactFlash, and external drive volumes 

Data Transfer / Control 

FireWire 400

For connection to ext drives and computers: IEEE-1394a compliant, 6-pin FireWire, Windows 
2000, XP, Vista, Mac OS 10.4+ only 

FireWire 800

For connection to ext drives and computers: IEEE-1394b compliant, 8-pin FireWire, Windows 
2000, XP, Vista, Mac OS 10.4+ only 

USB 2.0

Slave mode only. For connection to Windows 2000, XP, Vista, Mac OS 10.4+ for data transfer or 
Wave Agent control.  

USB Keyboard Input

For connection to USB keyboards for entering notes and controlling features and functions of the 
788T via user selectable keyboard shortcuts. 

C. Link

6-wire modular input and output, RS-232 machine control, word clock, time code transfer

Time Code and Sync

Modes Supported 

off, free run, record run, 24 hour run, external time code receive 

Frame Rates

 

23.976, 24, 25, 29.97DF, 29.97ND, 30DF, 30ND, 30+ 

Accuracy

 

Holds TC clock for 4 hours after main battery removal; after 4 hours, retains time of day 

Input / Output 

20k ohm impedance, 0.3V p-p (–8 dBu) minimum / 1k ohm impedance, 3.0V p-p (+12 dBu) 

Sync Input

Word Clock, AES3, Video (NTSC, PAL, and Tri-Level)

Word Clock Output

Square wave, running at sample rate, 3.3vp-p, 75 ohm.

Power

Power supply (batteries)  

operating cell, removable 7.2 V (nominal) Sony L-type Li-ion, operational from 6.5–8.5 V, 
time code battery, 3.6 Li-Ion,
time and date battery, 3 V coin cell 

Power supply (external)

10–18 V, 1000 mA minimum, via locking 4-pin Hirose connector, use Hirose #HR10-7P-4P 
(DigiKey# HR100-ND) for locking mating DC connector; pin-1 (

), pin-4 (+). See Powering 

Environmental 

Operation and Storage 

ambient temperature 5–55° C, 
relative humidity (non-condensing) <80% 

788T/788T-SSD User Guide and Technical Information

162

v. 3.01 

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Specifi

 cations

12

Summary of Contents for 788T





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands