manualshive.com logo in svg

Sound Devices 788T, User Manual And Technical Information

Share
Download
Sound Devices 788T User Manual And Technical Information Download Page 65

Circle Take 

Take names can be altered to include the “@” symbol preceding the fi le name. This can be used to 
highlight a take as a “Circled Take”. Circled Takes are often used to identify good takes for transfer-
ring. Circle Take information is also embedded within the BEXT and IXML data chunks.

To Circle or uncircle a take, perform the following steps: 

1.  Press the STOP key to end the recording. 

2.  Press the HDD key to enter the Take List. 

3. Scroll 

among 

fi

 les to highlight the 

fi

 le as a Circled Take. 

4.  Press the soft EDIT (PLAY) key to enter the Take Edit Menu. 

5.  Highlight and select the Circle option from the list. This will toggle the Circle indication on 

and o

ff

 . 

Project

Edits can be made to the Project fi eld during and after recording. The Project fi eld by default is the 
name of the Top-Level folder defi ned in the Setup Menu option 

FILE: FOLDER OPTIONS

. Project 

metadata is embedded within the BEXT and IXML data chunks.

Scene

Scene name edits can be made during and after recording. Any changes to the Scene name are ap-
plied to both the fi le name and the Scene tag in the iXML and bEXT chuncks.

Take 

Take number edits can be made during and after recording. Any changes to the Take are applied to 
both the fi le name and the Take tag in the iXML and bEXT chunks.

Tape (Roll)

Edits can be made to the Tape (Roll) iXML tag during and after recording. The Tape (Roll) 
fi eld by default is the name of the Mid-Level folder defi ned in the Setup Menu option 

FILE: FOLDER OPTIONS

. Tape (Roll) metadata is embedded within the BEXT and IXML data 

chunks.

Set and Clear Copy Flags 

Copy Flags are useful for selecting various takes to be copied from one media to another. By 
default, Takes recorded by the 788T have their Copy Flag set to On. If the Setup Menu option 

FILE: COPY FLAG RESET

 is enabled the Copy Flags will automatically clear after the fi le has been 

copied from one media to another. 

See File Copying Among Available Media.

R

ecording and Playbac

k

5

788T/788T-SSD User Guide and Technical Information

57

Summary of Contents for 788T





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands