manualshive.com logo in svg

Sound Devices 788T, User Manual And Technical Information

Share
Download
Sound Devices 788T User Manual And Technical Information Download Page 157

# Setup 

Name 

Description 

Options 

Factory 

Default

7.

Rec: Media Select 

Selects the storage media used for 
recording. Media is selectable even 
if it is not present. The 788T will only 
record to 2 media when recording 9+ 
tracks.

• INHDD  Only
• CF  Only 
• EXHDD  Only 

• INHDD and CF
• EXHDD and INHDD
• EXHDD and CF
• EXHDD and INHDD 

and CF

EXHDD and 
INHDD and CF

8.

Rec: Scene Name/Number 

User-defined, alpha-numeric file 
scene names can be pre-set and 
selected from a list. Scene name lists 
can be saved to the internal drive. 
Up to 9 alpha-numeric characters 
can be entered for the scene name. 
Scene name can also be left blank.

• <None>
• <Add New Entry>
• <Load List From INHDD>
• <Save List From INHDD>

None

9.

Rec: Scene Increment 
Mode

Selects which format the scene incre-
ments will use. To quickly increment a 
scene name press and hold the Stop 
key then press Fast Forward.  

• Disabled
• Character  (A,B,C...)
• Numeric  (1,2,3...)

Character 

10.

Rec: Track  Names

Allows user to give tracks more 
descriptive names, which show up in 
iXML and bEXT metadata.

• MixL
• MixR
• TrkA
• TrkB
• TrkC
• TrkD
• TrkE
• TrkF
• TrkG

• TrkH
• Aux1
• Aux2
• Mix
• Boom
• <Add New Entry>
• <Load List From INHDD>
• <Save List From INHDD> 

Track L = MixL
Track R = MixR
Track A = TrkA 
Track B = TrkB 
Track C = TrkC 
Track D = TrkD 
Track E = TrkE
Track F = TrkF
Track G = TrkG
Track H = TrkH
Track X1 = Aux1
Track X2 = Aux2

11.

Rec: Remote Track Naming

Enable or disable track names from 
a C.Link master unit to change track 
names on this unit.

• Disabled
• Enabled

12.

Rec: Take  Name/Number 

Numeric, auto-incrementing number 
used for take identification. 

<selectable alpha cha integers up to 
32000, with or without preceding 0’s> 

T01

13.

Rec: Take Reset Mode 

Defines when take numbers are reset. 
Reset brings take number to <1>.

• Never - take numbers do not reset 
• When scene is changed - take resets when 

scene name is changed 

• When daily folder changes - takes reset on 

new day 

• Either scene or daily - takes reset on either 

change 

Either scene or 
daily

14.

Rec: Pre-Roll Time 

Sets the amount of time that is re-
corded prior to pressing the REC key. 

• 0–10 sec. @ 48 kHz
• 0–5 sec. @ 88.2 kHz and above
• 0-2 sec. @ 176.4 kHz and above

2 Seconds

15.

Rec: Timer  Start 

Sets a specific start time/date for 
unattended recording. Unit must be 
powered. 

<enter time, date> 

(disabled)

16.

Rec: Timer  Stop 

Sets a specific time/date to stop 
recording. May be used with or 
without the Rec: Timer Start. May 
be set before the Timer Start time to 
temporarily stop recording and then 
resume recording with Timer Start. 

<enter time, date> 

(disabled)

17.

Rec: Record Indicator 

Sets how the large display looks 
when the unit enters record. 

• Normal  Numbers
• Reverse  Numbers
• Flash  Numbers 

Normal Numbers

Se

tup and Shor

tcut R

eference

11

788T/788T-SSD User Guide and Technical Information

149

Summary of Contents for 788T





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands