manualshive.com logo in svg

Sound Devices 788T, User Manual And Technical Information

Share
Download
Sound Devices 788T User Manual And Technical Information Download Page 9

Quick Start Guide

This Quick Start Guide provides a brief overview for fi rst use of the 788T/788T-SSD. The Quick Start 
Guide walks through the steps of getting signal into the 788T and making a recording. Many opera-
tional and relevant technical and operational details are not mentioned in these steps. For detailed 
operating instructions refer to the 788T/788T-SSD User Guide and Technical Information.

1. 

Connect Power. 

Connect the supplied AC-to-DC power supply to the DC connector on the 
Right Panel.

2. 

Attach the supplied Li-ion rechargeable battery to the recorder.

 

Line up battery contacts with the battery compartment mounting pins. Rotate 
battery lock to secure the battery in place.

788T Rear Panel

Included L-Mount Battery 

The included battery must be charged for six hours before initial use. 
The 788T will charge the L-Mount battery when DC is connected. 

3. 

Connect analog microphone or line sources. 

Please refer to the 788T/788T-SSD User Guide and Technical Information for 
connections with digital audio sources.

788T Left Panel

1

Quic

k S

tar

t Guide

788T/788T-SSD User Guide and Technical Information

1

Summary of Contents for 788T





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands