manualshive.com logo in svg

Sound Devices 788T, User Manual And Technical Information, Page: 44 / 180

Share
Download
Sound Devices 788T User Manual And Technical Information Download Page 44

5.  The image below indicates that Input 1 is now routed to Track L post fade and 

Track A pre fade. Once changes have been made, the se

tt

 ings will be saved in the 

INPUT: TRACK ROUTING

 Setup Menu option under the “Edited” routing selection.

6.  To exit Input to Track Routing press the Play key. 

7.  The new track assignments will be visible from the Input Se

tt

 ings Window.

Routing Using the Setup Menu

Press and hold STOP then press the INPUT key to bring up the following menu. This menu can also 
be accessed via the Setup Menu option 

INPUT: TRACK ROUTING

.

Continue to hold down the Stop key then press the 

 INPUT key to cycle through the preset 

input-to-track routing combinations. These presets are factory set and cannot be changed. The last 
three preset selections are 

CUSTOM 

 ROUTE

 options. Press the 

EDIT

 soft key to enter the custom rout-

ing menu. Custom routing allows any input to be assigned to any track. In the menu, highlighted 
input and track combination are displayed in white text. The eight inputs are shown on the left; the 
twelve tracks are shown on the right. Tracks can be assigned as pre or post fade, when the given 
track is highlighted press the Play key to toggle between pre and post fade assignment. 

788T/788T-SSD User Guide and Technical Information

36

v. 3.01 

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

R

outing and Mixing

4

Summary of Contents for 788T





















































































































































































Reviews:

No comments