Sound Devices 788T User Manual And Technical Information Download Page 117

Page: 117 / 180

5. Touch the right-facing, blue arrow next to the CL-WIFI’s SSID in the list of Wi-Fi networks. If

Auto-Join is set to OFF, touch the switch to turn it ON.

6. Wait for the wireless connection icon to appear in the upper-left side of the screen. This icon

indicates that the ad-hoc network is properly con

gured between the iOS device and the CL-

WIFI interface.

Wireless connection icon must be present before launching the CL-WiFi application.

Connection Troubleshooting

If the CL-WiFi application on the iOS device is not connecting properly to the CL-WIFI, refer to the
following points.

• Make certain that the CL-WiFi application is not running on the iOS device before entering

the 788T Setup Menu option

CL-WIFI: CONFIGURE

• Make certain that the CL-WiFi application is not launched while the 788T is in the Setup

Menu option

CL-WIFI: CONFIGURE

or any of its related screens.

• Set the SSID of the CL-WIFI to something that is unique to other SSID’s in the location of use.

• “Forget” the CL-WIFI Wi-Fi network in the iOS device’s network se

ings.

• Turn of Wi-Fi on the iOS device, and then turn it back on in the iOS device’s network se

ings.

emote Control

788T/788T-SSD User Guide and Technical Information

109

Summary of Contents for 788T





















































































































































































Search results

Summary of Contents for 788T

Reviews:

Sound Devices 788T, User Manual And Technical Information, Page: 117 / 180

Search results

Summary of Contents for 788T

Reviews: