manualshive.com logo in svg

Sound Devices 788T, User Manual And Technical Information

Share
Download
Sound Devices 788T User Manual And Technical Information Download Page 126

Fader Assignment

The CL-2 Fader controls the fader level of any 788T Input. Fader assignment is done in Setup Menu 
option 

CL-2: FADER ASSIGN

. 

When connected, the 788T fader or CL-8 fader (if attached) of the selected input will be disabled and 
replaced by the CL-2 fader. 

Movement of the 788T or CL-8 fader will have no effect on an assigned input while the CL-2 is con-
nected. If the Setup Menu option 

INPUT: FRONT PANEL CONTROLS

 is set to Trim Controls and there 

is no CL-8 attached, the input selected will be the only input with a fader control. When set to Trim 
Controls all other input fader levels default to unity gain (0 dB). 

CL-2 Switches

The CL-2 is equipped with two, two-position programmable toggle switches that can be assigned to 
control select functions of the 788T. Switches 1 and 4 are momentary switches and Switches 2 and 3 
are latching. The Switches can be assigned to control the following functions in the Setup Menu op-
tion 

KEYBOARD/LOGIC IN: ASSIGN.

 Please note that momentary switches can be assigned to have  

momentary or toggle action, toggle switches can only be assigned to toggle action. 

Function

Switches 1, 4

(Momentary)

Switches 2, 3 

(Latching)

Notes

Momentary

Toggle

Toggle Only

Record Button

Sw 1,4 Momentary - Hold to record, release to stop.
Sw 1,4 Toggle - Press and release switch to record, 
press and release again to stop.
Sw 2,3 Toggle - On enters record, Off stops the 
recording.

Play Button

Sw 1,4 Momentary - Hold to play, release to pause.
Sw 1,4 Toggle - Press and release switch to play, 
press and release again to pause.
Sw 2,3 Toggle - On enters playback, Off pauses 
playback. 

Stop Button

Record Mode - Stops recording
Playback Mode - One press pauses, two presses 
stops playback

Fast Forward Button

Press and hold to fast forward playback, release to 
resume playback

Rewind Button

Press and hold to rewind playback, release to 
resume playback

Menu Button

Sw 1,4 - Acts as Menu Button
Sw 2,3 - On enters Setup Menu, Off exits

HDD Button

Sw 1,4 - Acts as HDD Button
Sw 2,3 - On enters Take List, Off exits

Tone Button

Acts as the Tone Button (Generates Tone from Main 
LCD display only)

Brightness Button

Acts as the Brightness Button

Input Button

Sw 1,4 - Toggles Track Setup Window / Exits
Sw 2,3 - On enters Track Setup Window, Off exits

Power Button

Functions in the Main Display only 
Powers down the 788T, does not initiate power up

788T/788T-SSD User Guide and Technical Information

118

v. 3.01 

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Hardw

are Controllers

10

Summary of Contents for 788T





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands