manualshive.com logo in svg

Sound Devices 788T, User Manual And Technical Information, Page: 105 / 180

Share
Download
Sound Devices 788T User Manual And Technical Information Download Page 105

3.  Connect the 788T to the host computer with a FireWire 400, FireWire 800, or USB cable. If 

connecting with a USB cable make sure that the Setup Menu option 

CONNECTION MODE

 is set 

to Connect as Mass Storage. No drivers are required if the computer meets the requirements. 

See Speci

fi

 cations.

4.  If the 788T doesn’t search for the computer connection, initialize the FireWire/USB connection 

by entering the Setup Menu option 

CONNECTION MODE

 and select Connect as Mass Storage or 

simply press and hold the STOP key then press the HDD key. The 788T will enter File Trans-
fer mode, indicated by 

FIREWIRE/USB CONNECTION

 on the LCD display. All functions of the 

788T are stopped while the 788T is connected to a computer.

5.  Navigate to either the internal drive or CF card from the computer and copy all needed audio 

fi

 les to local storage on the computer.

To avoid possible directory corruption on the 788T internal drive, always properly dismount the 
unit from the operating system. On Mac platforms, drag the drive icons to the trash. On Windows 
platforms, use the “Eject”, “Safely Remove”, or “Disconnect External Media” icon in the system 
tray. 

To disconnect the 788T from the computer: 

1.  Make certain that any software applications that reference the 788T drive are closed and that 

all 

fi

 le copy functions to and from the 788T have completed. 

2.  In Mac OS X highlight the drive icon on the desktop and select  -e to eject the volume. Alter-

natively, drag the drive icon to the trash in the dock. In Windows, right-click the drive icon 
and select “eject.”

3.  The cable between the computer and 788T can now be disconnected. If a future connection is 

going to be made the cable can be left connected. 

If the 788T is disconnected from the computer via an eject command and the chosen cable is still 
physically connected between the computer and recorder, the data connection can be made by enter-
ing the Setup Menu option 

CONNECTION MODE

 and selecting Connect as Mass Storage.  Alternatively, 

simultaneously press the STOP and HDD keys to begin a connection. 

Do not remove the CompactFlash card while 

FIREWIRE/USB: CONNECTION

 appears in the LCD. 

File Management and S

torage

8

788T/788T-SSD User Guide and Technical Information

97

Summary of Contents for 788T





















































































































































































Reviews:

No comments