Chapter 3
Advanced Operation
59
Chapter 3
Voice Meeting
VOICE ONLY
The system can connect to a normal phone to hold a meeting
using the sound only.
(Voice Meeting)
The basic procedure is same as one with images and sound.
Note
When you have installed the optional PCS-I152 LAN Board,
and using a LAN, you cannot do the voice meeting.
To start a voice meeting with unregistered remote parties
Set LINE I/F to ISDN BRI (Speech) in the Dial Setup menu.
For details on the setting, see “Calling an Unregistered
Remote Party” on page 25.
The indication “VOICE ONLY” appears on the monitor
screen, and the local picture is displayed on the local monitor
screen.
To register remote parties for holding a voice meeting
Set LINE I/F to ISDN BRI (Speech) in the Dial Setup menu.
For details on the registration, see “Calling a Registered
Remote Party” on page 32.
To set the audio protocol
Set up the TELEPHONE item in the Other Setup menu.
When you call, set TELEPHONE to AUTO. This automatically
sets to
µ
-law (NTSC); to A-law (PAL).
When you receive, the audio protocol setting is not required.
For details on the setup, see “Other Setup menu” on page 84.
