Sony PCS-1500 Operating Instructions Manual Download Page 53

Page: 53 / 140

Chapter 2

Basic Operation During a Meeting

Chapter 2

Monitoring Yourself in the Inset
Window

Monitor screen

The inset window
disappears.

The inset window allows you to monitor your own party while
viewing the remote party.

(Picture-in-picture function)

Press the PinP button on the Remote Commander.
If an inset window is not displayed, the inset window appears
on the monitor screen.
When it is already displayed, each time you press the PinP
button, the inset window moves as follows:

Notes

• The inset window is displayed at the same position as it was

displayed last. If the inset window is not displayed last, it is
not displayed.

• The inset window does not appear when your system is not

connected to a remote party.

• The inset window does not appear when a still picture is

displayed on the main screen.

• You cannot use the picture-in-picture function when a picture

of the local party is displayed on the main screen during a
meeting.

Summary of Contents for PCS-1500













































































































































Search results

Summary of Contents for PCS-1500

Reviews:

Related manuals for PCS-1500

Brands by name

Popular brands

Sony PCS-1500, Operating Instructions Manual

Search results

Summary of Contents for PCS-1500

Reviews:

Related manuals for PCS-1500

Brands by name

Popular brands