Sony PCS-1500 Operating Instructions Manual Download

Page: 120 / 140

120

Appendix

Location and Function of Parts and Controls

INPUT SELECT buttons

Selects the input.

MAIN: Selects the camera of the

Compact Processor.

OBJECT: Selects the infrared video

input via the IR sensor.

VIDEO/TV: Selects the video input.
AUDIO: Selects the audio input.

FAR/NEAR button

Selects the camera to be adjusted.

CAMERA buttons

Operates the camera.

PRESET: Used to preset the camera

adjustment settings with the A–F
buttons.

AUTO TRACK: Displays the Auto

Tracking menu.

A–F: Used to preset or recall the

setting.

EDIT buttons

ALPHA/NUM: Switches the

character input mode.

SYMBOL: Enters special

characters.

CLEAR: Deletes an entry.
BACK SPACE: Deletes the last

input character.

DISPLAY buttons

MULTI/AUTO: Displays the Chair

Control menu.

VIEW SEL: Selects the terminal to

be displayed .

FAR/NEAR: Switches the picture

between local and remote.

PinP: Displays the inset window.

When holding a point to multi-point
meeting with the unit upgraded, these
buttons function as follows:

MULTI/AUTO: Switches the

broadcast mode.

VIEW SEL: Selects the terminal to

be broadcast.

FAR/NEAR: Displays the local

picture temporarily in VOICE
ACTIVATE mode.

PIX SHOT buttons

SNAP: Sends one still picture.
AUTO: Sends still pictures

continuously.

MENU button

Displays the Menu (System
Configuration) menu on the monitor
screen.

button

Press this button to turn into standby
when the system is turned on; to turn
on the system when the system is on
standby.

To operate a Sony TV
monitor

Note

When you operate a Sony TV, set the
CONF/DOC/TV selector to “TV.”

VOLUME/BRIGHT (+/–)

buttons
These buttons adjust the volume.

+: press to increase the volume.
–: press to decrease the volume.

Summary of Contents for PCS-1500













































































































































Search results

Summary of Contents for PCS-1500

Reviews:

Related manuals for PCS-1500

Brands by name

Popular brands

Sony PCS-1500, Operating Instructions Manual

Search results

Summary of Contents for PCS-1500

Reviews:

Related manuals for PCS-1500

Brands by name

Popular brands