Sony PCS-1500 Operating Instructions Manual Download Page 49

Page: 49 / 140

Chapter 2

Basic Operation During a Meeting

Chapter 2

Press the AUTO TRACK button on the Remote
Commander.

The Auto Tracking menu and the frame appear on the
monitor screen.

Press the CAMERA (

) and the ZOOM/CH

buttons on the Remote Commander to place a subject into
the frame.

Notes

• Be sure to place the subject so that the portion uniform in

brightness and color is in the frame.

• The camera might not recognize a subject if the portion

different from the subject in brightness and color, such as
the backdrop, is placed together in the frame.

Press the EXEC button on the Remote Commander.

The indication appears on the monitor screen.
The automatic target tracking function starts and the frame
disappears from the monitor screen.

To cancel the automatic target tracking function

Press the AUTO TRACK button on the Remote Commander to
display the Auto Tracking menu, then press the CANCEL
button.
The indication disappears from the monitor screen.

START: EXEC

END: CANCEL

Auto Tracking

Summary of Contents for PCS-1500













































































































































Search results

Summary of Contents for PCS-1500

Reviews:

Related manuals for PCS-1500

Brands by name

Popular brands

Sony PCS-1500, Operating Instructions Manual

Search results

Summary of Contents for PCS-1500

Reviews:

Related manuals for PCS-1500

Brands by name

Popular brands