44
Maintenance
C
h
ap
te
r 1
U
s
e
r Gu
id
e
Maintenance
The Maintenance menu
selection allows you to
access the following
maintenance functions
for the SMS System.
• Projector
• Security
• Network Setup
• Time Zone
• Clock Settings
1
• Owner Info
General Maintenance
operations include;
Projector specific
settings, System Security
information, and Theater
Network settings
2
.
Additional information may be contained in
documentation specific to the sub-system.
Projector
To access the
Maintenance - Projector
pane, tap
Menu
, tap
Maintenance
and then
tap
Projector
. The
Projector Maintenance
pane appears which
allows the you to Refresh
the Projector data, select
a Test Pattern to be
shown on the screen, and
initiate the Luminance
calibration process. In
addition, the current
Lamp Information is
shown.
Note:
Some projector setup and maintenance operations
use the SRX Controller
3
application. An example would
be; Lamp Replacement, setting of FUNCTION names, and
associating a specific Color Space with a FUNCTION.
The SRX Controller is a stand alone software application
that allows a computer to directly control the SRX-R320.
This control is via the serial connector located on the rear
panel of the projector just below the circuit breakers. When
adjustments are made using the SRX Controller the
changes and settings are
not
automatically transferred to
the SMS Server and therefore, do not appear on the
Projectionist Terminal. A
REFRESH
button is available
on the PROJECTOR MAINTENANCE pane which
causes the SMS Server to query the Projector and make the
refreshed data available to the Projectionist Terminal.
Executing the Calibrate Luminance function should be
done with care as this can affect the Lamp Power range and
cause the brightness of the image to change. Selecting a
Test Pattern will interrupt the presentation image.
Operations available on the Maintenance screen are;
• REFRESH SMS Server
The
Refresh Projector Data
button reloads the SMS
Server application with all the Projector data.
The Refresh function is used whenever the SRX
Controller
4
has been connected directly to the
projector to accomplish maintenance operations,
e.g., bulb replacement. After the SRX Controller has
been disconnected from the projector you should
refresh the SMS Server (tap
Refresh Projector Data
)
which will update the SMS Server with any changes
made using the SRX Controller application.
Note: Refresh Projector Data
is a maintenance
function. Refreshing the SMS Server with new data
from the projector takes some time and may result in
unexpected projector operation should this action be
taken during Show presentation.
1.The appearance of the Clock Settings menu item is role
restricted.
2.The Auditorium Unit has an internal network that has a
fixed configuration. The settings available on the Network
Setup pane are for Theater Network connection.
3.The SRX Controller exercises direct control over the pro-
jector and therefore should not be used at the same time the
Projectionist Terminal or SMS Controller is in operation.
Tap Menu
Tap Maintenance
Maintenance Menu
Tap Projector
Maintenance Menu
4.The SRX Controller is typically a PC running the SRX
Controller application and connected to the projector us-
ing a serial data line.
Refresh Projector Data
LAMP INFORMATION
Calibrate Luminance
Summary of Contents for LMT-300
Page 61: ...54 Restart SMS Server Chapter 1 User Guide ...
Page 71: ...Sony Corporation ...
