38
Status
C
h
ap
te
r 1
U
s
e
r Gu
id
e
the combined Status Warning indicators and selector
buttons. When any Warning condition exists the STATUS
button will appear RED as shown. To view which system
area requires attention, tap the
STATUS button
and the
Status Warning/Selector buttons appear.
As illustrated to the right, the Lamp
Selector/Warning indicator will be RED
when an error condition exists. To view the
Lamp Status, tap the
Lamp Warning
icon.
Lamp Information
This Lamp Information group shows the Lamp Hours,
total Operation Hours (projector), Lamp ON Timer, and
the most recent date the lamp was REPLACED.
Lamp Hours
The value shown for Lamp Hours is an effective value
which uses the Lamp Power value to adjust the actual
Lamp ON hours downward when operating the lamp at
less than 100% power. This value is reset to “0” (zero)
when the lamp is replaced and a new Lamp Serial Code is
entered.
Operation Hours
The value shown for Operation Hours is the total number
of hours when AC Mains are applied to the Projector.
Total Lamp ON Hours
The value shown for Total Lamp ON Hours is the actual
number of hours when the Lamp is in the ON mode. No
adjustment is made to the value for Lamp Power at less
than 100%. This value is reset to “0” (zero) when the lamp
is replaced and a new Lamp Serial Code is entered.
Note:
The lamp should be replaced prior to exceeding
recommended operating hours. Refer to the projector
documentation for additional information.
Lamp Indicators
Lamp Timer Alert
The Lamp Timer Alert is green when the lamp hours are
less than the recommended operating hours. The indicator
will display yellow when the hours are exceeded.
Lamp Ballast
The indicator is green when the status of the power
(ballast) for the projection lamp is normal. The indicator
will display red when an error is detected.
Lamp Z-Axis Adjust
The Lamp Z-Axis indicator is green when the status the
Z-axis adjustment motor used for lamp positioning is
normal. The indicator will display yellow when an error is
detected.
Luminance Adjust
The Luminance Adjust indicator is green when the
luminance adjustment feature is operating normally. The
indicator will display yellow when an error is detected.
Luminance Adjust Limit
This indicator is reserved for future expansion of projector
features. Currently this indicator is green at all times.
Fan Status
To access the Status
pane for System Fans,
tap
Menu
, tap
Status
and then tap
Fan
.
The Fan pane appears
displaying status
indicators for fan
operation in the
Auditorium Unit and
areas in the Projector
sub-system. They are:
• Media Block,
Enclosure,
Projector
• Peltier (R/G/B)
• Panel (R/G/B Imagers)
• Lamp
• Board
When Fan Status is selected from the Status Menu the
FAN STATUS information is displayed.
The STATUS button shown to the right
appears on all SMS Controller windows and
provides immediate access to the Fan Status
information. When any Warning condition exists the
STATUS button will appear RED as shown. To view
which projector area requires attention, tap the
STATUS
button
and the Status Selector/Warning buttons appear.
Tap Fan
Status Menu
Lamp & Board
Peltier Devices
Red, Green, Blue
Media Block
Enclosure
Projector
Panel (Imaging) Devices
Red, Green, Blue
Summary of Contents for LMT-300
Page 61: ...54 Restart SMS Server Chapter 1 User Guide ...
Page 71: ...Sony Corporation ...
