Sony LMT-300, User Manual

Page: 40 / 71

33
Projector
Chap
te
r 1
Us
er Gu
ide
1
To begin the Registration Adjustment process, tap
Enable . The Registration Adjustment Horizontal and
Vertical controls become available.
Registration adjustment range is from +2pixels to -
2 pixels with an increment of adjustment of +/-1 pixel.
Tap the appropriate Plus or Minus button to
align the Red, Green and Blue images as observed on
the auditorium screen.
Note: Insure that Lens Focus is optimized prior to
starting the registration process. In some cases it may
be beneficial to use a white sheet of paper placed flat
against the screen so you can see the black/white
transition to verify lens focus (use crosshatch pattern)
and also to make it easier to see registration errors.
2
Other Test Patterns may be used during the
Registration Adjustment process. Since the
adjustments made are set immediately tin the projector
you can exit the Registration Adjustment pane to
change the Test Pattern as needed. To select a different
Test Pattern, tap
Close and
you are prompted if you wish to
leave Registration Enabled, tap YES .
Tap Test Patterns ,
select the new Test Pattern and then tap Close . The
ADJUSTMENT pane reappears.
3
Tap Registration and continue with the adjustment
process.
Test Pattern (Change)
To select a test
pattern image
from the
ALIGNMENT
pane, tap
Test
Pattern . The
TEST
PATTERN
popup appears.
The CHECKER
FLAG Pattern is
normally used
for registration
adjustment. However, the CROSSHATCH or
INVERT CROSSHATCH Pattern may also be useful
when reviewing the final settings.
Once all images are properly registered, tap Disable and
then tap Close on the Registration Adjustment pane. The
Registration Adjustment screen closes and you are
returned to the ADJUSTMENTS pane.
Projection Type 3D
To access
ADJUSTMENT, tap
Menu, tap Projector and
then tap Adjustment .
The ADJUSTMENT
pane based on a 3D
Projection Type appears.
The ADJUSTMENT
pane contains a display
showing which
FUNCTION is currently
selected
1
, and controls
Tap to Close
Tap to Enable
Tap +/- to set Horizontal or
Vertical position of Image.
Tap Disable before
Closing
1.Access to the Adjustment pane is only available when
the Projector is in ON mode, the Projection Type is 3D and
the selected FUNCTION is a 3D FUNCTION.
Tap Desired Pattern
to Select
Tap Adjustment
Projector Menu