Sony LMT-300 User Manual Download Page 12 | Manualshive

Page: 12 / 71

background image

5

Basic Screen View

Chap

te

r 1

Us

er Gu

ide

• Ghostbuster Indicator

The Ghostbuster Indicator indicates whether the SMS
Server user license has been obtained for the
Ghostbuster function, and whether the function is
enabled.
When the production type is

3D

and a Ghostbuster

license has been obtained,

GB

appears. Depending on

whether the Ghostbuster function is enabled or
disabled (deactivated),

GB

is displayed in pink or gray

respectively.

• Lamp ON/OFF indicator

The

Lamp ON/OFF

indicator provides an easily

viewed indication of the state of the Projector Lamp.

• Prepare Auditorium (Button)

The

Prepare Auditorium

button is a control which

sets the Projector to ON (from STANDBY or Lamp
OFF), opens the douser, and enables audio output from
the Media Block.

• STATUS Alert (Button)

The

STATUS Alert

button at the bottom of the screen

toggles the Status Warning/Selector buttons. These are
dual purpose Warning indicators and Selector buttons
which, when illuminated, display a warning related to
the status of the specific hardware sub system.

Note:

The Status Alert button appears RED whenever

any of the Status Selector buttons are RED.

Tap the

STATUS Alert

button to view the Status

Warning/Selectors as shown below. Tap any of the
Status Selector buttons to view the specific Status
pane. Tap

X

to close the Status Selector buttons.

To access other screens from the Projectionist Terminal,
tap the

Menu

button and then tap a

Screen Name

button.

Menus

The Menu structure on
Projectionist Terminal
is two levels deep and
is illustrated to the
right. Some selections
may not appear as they
are Role dependant.

Tap

Menu

and the

Level 1 menu appears
providing access to
major operational
areas;

• Shows
• Content
• Projector
• Status
• Logs
• Maintenance

Note that when selecting the Menu both Level 1 and
Level 2 menus open showing the history of the most recent
selection. (The Level 2 menu will not appear on the initial
selection of Menu by the user.)

Tap the

Level 1 selection

and the level 2 menu changes to

provide access to those screens related to the level 1
selection and included functions, e.g., Now Showing,
Projector Control, Fan Status, etc.

In addition, from the Level 1 menu you have access to the

Logout

and

Restart SMS Server

1

functions.

Component

Lamp

Fans

Temperature

Information
Messages

Exit

Status

1.A menu based System Shutdown is optionally available
based on system configuration.

Tap Menu

Tap Level 1

Selection

Level 2 Menu

«
...
10
11
12
13
14
...
»

Summary of Contents for LMT-300








































































Reviews:

No comments

Related manuals for LMT-300

Brand: JBL Pages: 10

Brand: JBL Pages: 4

Spacemaker 7-5400

Brand: GE Pages: 12

Brand: Aaron Pages: 2

Brand: Aaron Pages: 3

Brand: Pure Acoustics Pages: 1

Brand: Akai Pages: 8

Cinema Vision CVIW50

Brand: JBL Pages: 2

Brand: YORKVILLE Pages: 16

Brand: Gembird Pages: 9

Bell'O Digital BDSW-1650-BLK

Brand: Twin-Star International Pages: 20

Brand: Elenberg Pages: 36

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 16

Brand: Panasonic Pages: 31

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 40

Brand: Panasonic Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands