manualshive.com logo in svg

Sony HDCAM HDW-730, Maintenance Manual

The Sony HDCAM HDW-730 is a high-definition video camera that revolutionizes professional filming. Explore its vast capabilities with the comprehensive Operation Manual available for free download on our website. Maximize your creative potential and achieve stunning visuals with this cutting-edge camera. Get your manual from manualshive.com.

Share
Download
background image

3

HDW-750/750CE V1

1-24. Upgrading the ROM Version .................................................................... 1-59

1-24-1. Confirming the ROM Version ................................................. 1-59
1-24-2. When a Memory Stick Is Used for Version Upgrading

(AT-143 Board, FP-121 Board, SS-92 Board) ......................... 1-59

1-24-3. When the ROM-28 Board Is Used for Version Upgrading

(AT-143 Board) ........................................................................ 1-61

1-24-4. When the FL-272 Board Is Used for Version Upgrading

(SS-92 Board) ........................................................................... 1-62

1-25. How to Replace the Photo Sensors on the MDC-13 Board ...................... 1-63

1-26. Circuit Description .................................................................................... 1-64

1-26-1. CCD Block (TG-219 Board, DR-433 Board,

BI-147 Board, and PA-253 Board) .......................................... 1-64

1-26-2. Camera System (DCP-28 Board) ............................................. 1-65
1-26-3. Video Signal System (DVP-18 Board) .................................... 1-66
1-26-4. Audio System (FP-121 Board, IFA-11 Board,

APR-59 Board, AL-43 Board, and AXM-24 Board) ............... 1-68

1-26-5. System Control (FP-121 Board and SS-92 Board) .................. 1-72
1-26-6. Servo Control System (SS-92 Board, MDC-13 Board,

MDR-14 Board, and SE-613 Board) ........................................ 1-75

1-26-7. RF System (EQ-88 Board) ....................................................... 1-76
1-26-8. Power Supply Systems (CNB-15 Board,

RE-186 Board, and RE-187 Board) ......................................... 1-77

1-26-9. Option Board (DC-110/110A Board, MY-99 Board,

PM-22 Board) ........................................................................... 1-78

2. Periodic Maintenance and Inspection

2-1.

Cleaning ...................................................................................................... 2-1

2-1-1.

General Information for Cleaning .............................................. 2-1

2-1-2.

Cleaning the Upper Drum Tape Running Surface
and Video Heads ........................................................................ 2-3

2-1-3.

Cleaning the Lower Drum Tape Running Surface
and Rabbet Guide ....................................................................... 2-4

2-1-4.

Cleaning the Stationary Heads ................................................... 2-5

2-1-5.

Cleaning the Tape Running Path and Cleaning Blade ............... 2-6

2-1-6.

Cleaning the S/T Plate Assemblies and S/T
Slider Assemblies ....................................................................... 2-7

2-1-7.

Cares after Using under Special Environment ........................... 2-8

2-2.

Periodic Inspection ...................................................................................... 2-9

2-2-1.

Hours Meter ............................................................................... 2-9

2-2-2.

Periodic Inspection List ............................................................ 2-10

2-2-3.

Applying Oil to Reel Drive Gear Assembly ............................ 2-11

2-2-4.

Applying Grease to S Tension Regulator Assembly ................ 2-12

2-2-5.

Notes on Repair Parts ............................................................... 2-14

2-2-6.

Recommended Periodic Replacement Parts ............................. 2-15

2-2-7.

Recommended Replacement Parts ........................................... 2-17

Summary of Contents for HDCAM HDW-730

































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for HDCAM HDW-730

Xenta MD800 Instruction Manual preview
MD800
Brand: Xenta Pages: 5
Ultracker ALETA S2C Quick Manual preview
ALETA S2C
Brand: Ultracker Pages: 3
Olin DVC-380 User Manual preview
DVC-380
Brand: Olin Pages: 44
Sony SELP18200 Instruction & Operation Manual preview
SELP18200
Brand: Sony Pages: 2
Sony RM-AV2 Instruction & Operation Manual preview
RM-AV2
Brand: Sony Pages: 2
Sony PHU-60K Series Specifications preview
PHU-60K Series
Brand: Sony Pages: 2
Sony PHU-60K Series Brochure preview
PHU-60K Series
Brand: Sony Pages: 4
Sony HVL-S3D Instruction & Operation Manual preview
HVL-S3D
Brand: Sony Pages: 2
Sony HVL-LBPA Instruction & Operation Manual preview
HVL-LBPA
Brand: Sony Pages: 2
Sony HVL-LBP Instruction & Operation Manual preview
HVL-LBP
Brand: Sony Pages: 2
Sony HVR-DR60 - 60GB Hard Disk Recorder Specifications preview
HVR-DR60 - 60GB Hard Disk Recorder
Brand: Sony Pages: 6
Sony SAL1855 - 18-55mm f/3.5-5.6 SAM DT Standard Zoom Lens Manual preview
SAL1855 - 18-55mm f/3.5-5.6 SAM DT Standard Zoom Lens
Brand: Sony Pages: 15
Sony HVR-DR60 - 60GB Hard Disk Recorder Brochure & Specs preview
HVR-DR60 - 60GB Hard Disk Recorder
Brand: Sony Pages: 12
Sony PDBK-MK1 Installation Manual preview
PDBK-MK1
Brand: Sony Pages: 16
Sony Digital Photo Printer DPP-EX7 Specifications preview
Digital Photo Printer DPP-EX7
Brand: Sony Pages: 2
Sony PHU-60K Series Operating Instructions Manual preview
PHU-60K Series
Brand: Sony Pages: 23
Sony HVL-ML20 Operating Instructions Manual preview
HVL-ML20
Brand: Sony Pages: 19
Sony ICX418AKL Product Manual preview
ICX418AKL
Brand: Sony Pages: 22

Brands by name

Popular brands

Load more brands