4-66
HDW-750/750CE V1
? 06
O
RP DC OFFSET
R DC OFFSET 0 : 0
R DC OFFSET 180 : 0
G DC OFFSET 0 : 0
G DC OFFSET 180 : 0
B DC OFFSET 0 : 0
B DC OFFSET 180 : 0
DC ADJ MODE : OFF
OUTPUT SELECT : Y
DCP ADJUST Display (Adjusting the DCP-28 board)
Item
Setting
Function
VF Y DC LEVEL
(
_
99 to 99)
Adjusts the black level of the signal that is output to VF.
VCO CONT
(
_
99 to 99)
Adjusts the oscillating frequency.
RGB OUT R LEVEL
(
_
99 to 99)
Adjusts the R-signal level when the OUTPUT SELECT is set to RGB.
RGB OUT B LEVEL
(
_
99 to 99)
Adjusts the B-signal level when the OUTPUT SELECT is set to RGB.
Reference : When the OUTPUT SELECT is set to RGB upon
completion of the Y/Pb/Pr signal level adjustment, the
offset values are adjusted by the RGB OUT R/B
LEVEL. Because the digital output code of Pr/Pb is
larger than the digital output code of R/G/B, a slight
level difference is generated between the above two
signals when the same output signal amplitude of 700
mV is desired at the analog OUT connector.
DETAIL BALANCE
(
_
8 to 8)
Adjusts the right-side and the left-side balance on screen of
the detail signal.
RP DC OFFSET Display (Adjusting the DC value of the RP-123/RP-127 board)
Item
Setting
Function
R DC OFFSET 0
(
_
99 to 99)
R DC 0 phase adjustment
R DC OFFSET 180
(
_
99 to 99)
R DC
p
phase adjustment
G DC OFFSET 0
(
_
99 to 99)
G DC 0 phase adjustment
G DC OFFSET 180
(
_
99 to 99)
G DC
p
phase adjustment
B DC OFFSET 0
(
_
99 to 99)
B DC 0 phase adjustment
B DC OFFSET 180
(
_
99 to 99)
B DC
p
phase adjustment
DC ADJ MODE
*
1
OFF/ON
Turns ON/OFF of the DC ADJ MODE.How to adjust the DC ADJ,
refer to “9-6. Black Offset Adjustment” of this manual.
OUTPUT SELECT
Y/R/G/B/RGB
*
2
Selects the video signal that is output from the TEST OUT and
the VBS/SDI OUT terminal. (The Y-signal becomes the VBS
signal when the REAR BNC OUT SEL of the OUTPUT SEL
display of the OPERATION menu selects the VBS position and
when the TEST OUT SELECT chooses the SD position.) The
output signal returns to the Y-signal without fail at power-on.
*
1 : This item is displayed only when the RP-127 board is used.
*
2 :RGB can be selected only when the Camcorder is used in the service mode.
? 05
O
DCP ADJUST
VF Y DC LEVEL : 0
VCO CONT : 0
RGB OUT R LEVEL : 0
RGB OUT B LEVEL : 0
DETAIL BALANCE : 0
4-9. SERVICE Menu
