1-46
HDW-750/750CE V1
1-15. How to Extend the Circuit Board
1-15-12. Extending the Mechanical Deck
Assembly
Required tools : EX-764 board (3 boards),
Flexible card wire (45 core, 250 mm)
(6 wires)
n
Life of flexible card wire will be significantly shortened if
it is folded. Be very careful not to fold the flexible card
wire.
1.
Remove the outside panel assembly.
(Refer to Section 1-4.)
2.
Open the inside panel assembly.
(Refer to Section 1-5.)
3.
Remove the DCP board assembly.
(Refer to Section 1-7-1.)
4.
Remove the DVP board assembly.
(Refer to Section 1-7-2.)
5.
Remove the harness clamp.
n
Remove the harness clamp in case of that the shape of
the harness clamp is the same as shown in illustration.
6.
Remove the five screws and remove the dust protec-
tion cover.
7.
Remove the flexible card wires from the connector
(CN101) on the MB-898 board, the connectors
(CN201 and CN202) on the SS-92 board and the
connector (CN4) on the MDR-14 board.
CN201
CN202
MDR-14 board
CN4
Flexible
card wire
CN101
MB-898 board
Dust protection
cover
Precision
screw
P2
x
4
Harness clamp
SS-92 board
Flexible card wires
