7-133
HDW-750/750CE V1
(2) While holding the capstan motor with hands,
remove the two screws from the mechanical
deck assembly and remove the capstan motor
from the mechanical deck assembly.
n
Be careful not to drop the capstan motor.
PS2
x
5
Capstan motor
Installation
6. Installing the capstan motor
(1) Install the new capstan motor by reversing
the steps of removal.
The standard tightening torque value :
20
x
10
_
2
N
.
m (2 kgf
.
cm)
n
When inserting the capstan motor through the
hole of mechanical deck assembly, be careful
not to touch the capstan motor shaft against
the mechanical deck assembly. Doing so
results in damage to the capstan.
(2) Connect the connector to the capstan printed
wiring board that is removed in step 5 (1).
n
Connection of the connector is easy to forget.
Be careful that the connector is re-connected.
7-37. Capstan Motor Replacement
