6-5
HDW-750/750CE V1
6-2. Filter Disk Unit Replacement
n
Replace the filter disk unit in the place such as clean room that is free from dust.
Removal
1.
Remove the outside panel assembly.
(Refer to Section 1-4.)
2.
Open the inside panel assembly.
(Refer to Section 1-5.)
3.
Remove the CCD unit. (Refer to 6-1-1.)
4.
Remove the two screws and disconnect the
harness from the connector (CN3) on the DR-
433 board (DR-477 board) and take the filter
disk unit out gently.
Installation
1.
Install the new filter disk unit by reversing
step 4 of removal.
n
When installing the filter disk unit, be careful
not touch the surface of the filter disk unit
with hand.
2.
Install the CCD unit. (Refer to Section 6-1-1.)
Adjustment after Replacement
Adjustment after Replace of the Filter Disk Unit
(Refer to Section 9-28.)
K3
x
6
Filter disk unit
CN3
DR-433 board
(DR-477 board)
CCD unit
6-2. Filter Disk Unit Replacement
