Sony Anycast station AWS-G500 Operating Instructions Manual Download

Page: 297 / 316

297

Troubleshooting

ppen

dix

External hard disk

The hard disk number does not
appear in the source viewer.

The source viewer is set to “No
Assign.”

Set the input with [Video Input
Assign] on the top menu.

The source viewer shows “No
Interface Module.”

Connect the interface module
correctly.

The hard disk is not recognized.

Disconnect the cable, then
reconnect, and restart this unit.

178, 189

Program output recording is
reserved.

Set [PGM Recording] of [ON
LINE Manager] in the top menu
to [Off].

175

The DV connector is set for
program output recording.

Set [PGM Output] of [DV OUT]
of [Video Output] in the top
menu to [Off].

191

Attempts at recovery yield
repeated messages, “An error
occurred while recovering.”

The hard disk data is
unrecoverable.

Use [File Manager] on the top
menu

[Format].

* This erases the data.

172

The [PGM Recording] menu
does not appear.

The aspect ratio is set to 16:9 HD
mode.

Set to 4:3 or 16:9 SD mode.

The hard disk number remains
grayed out.

The hard disk is being recovered
automatically.

If the hard disk number does not
display properly after waiting a
few moments, restart the unit.

–

HD video interface module or HD serial digital interface module

The HD indicator does not light.

The aspect ratio is not set to 16:9
HD mode.

Set to 16:9 HD mode.

25, 52

Keyboard

The keyboard does not work.

The keyboard is out of range of
the infrared sensor.

Use the keyboard within range of
the infrared sensor.

The keyboard batteries are
depleted (when the keyboard is
detached for use).

Replace the batteries.

Problem

Possible causes

Possible solutions

See
page

Summary of Contents for Anycast station AWS-G500





























































































































































































































































































































Search results

Summary of Contents for Anycast station AWS-G500

Reviews:

Related manuals for Anycast station AWS-G500

Brands by name

Popular brands

Sony Anycast station AWS-G500, Operating Instructions Manual

Search results

Summary of Contents for Anycast station AWS-G500

Reviews:

Related manuals for Anycast station AWS-G500

Brands by name

Popular brands