Sony Anycast station AWS-G500, Operating Instructions Manual

Page: 222 / 316

Chap
te
r 3
O
per
at
ion
s
222
Video/Audio Signal Adjustments and Settings
The items for which you can adjust the level are as follows.
[AUX1 OUT Level]: Sets the output level for the audio output from the
AUX1 connector.
[AUX2 OUT Level]: Sets the output level for the audio output from the
AUX2 connector.
[MIX OUT Level]: Sets the output level for the audio from the MIX output.
Adjust the audio level output from the PGM audio output connectors using
the PGM fader on the front panel (page 171).
4
Press the MENU button to close the menu.
If the Output Video Is Delayed With Respect to the Audio
If the output video is delayed with respect to the audio, by delaying the audio you
can resynchronize it with the video.
1
Connect monitor devices to the PGM video output connectors.
2
Connect devices to the PGM/AUX/MIX audio output connectors.
3
Press the MENU button.
4
In the top menu select [Audio Output].
The [Audio Output] menu appears.
5
1
Select the item connected to the connector in step 2, and confirm;
2
while watching the video connected in step 1, adjust it with the slider.
The items for which you can adjust the delay time are as follows.
[PGM OUT Delay]: Sets the delay time for the program output audio in
frame units.
[AUX1 OUT Delay]: Sets the delay time for the audio output from the
AUX1 connector in frame units.
[AUX2 OUT Delay]: Sets the delay time for the audio output from the
AUX2 connector in frame units.
[MIX OUT Delay]: Sets the delay time for the audio from the MIX output
in frame units.
• As the duration for one frame in 720p signal format is half of that in 1080i
format, you must set the audio delay time to half the value set for 1080i
when using 720p.
• Adjusting the delay time may cause noise to occur.
Note
Caution
PGM OUT Delay 2F
AUX1 OUT Delay 2F
AUX1 OUT Level 0dB
AUX2 OUT Delay 2F
AUX2 OUT Level 0dB
MIX OUT Delay 2F
MIX OUT Level 0dB
1 2