Sony Anycast station AWS-G500, Operating Instructions Manual

Page: 264 / 316

Chap
te
r 3
O
per
at
ion
s
264
Setting Live Streaming Transmission
When using the http protocol for access
http://Server Address[:Port]/ramgen/broadcast/[Stream Path]/File Name.rm
* If port number 80 is to be used, you can omit [:Port] after the server
address.
For “Server Address,” “Stream Path,” and “File Name,” enter the character
strings set on the unit.
4
Press the Enter key.
Select [Preferences] on the [Tools] menu in Real Player, and configure your
connection settings in accordance with your network environment.
Guidelines for number of Real Player connections depending on
transfer rate (for Own)
The following table shows the number of Real Player connections possible for
each transfer rate.
The figures are guidelines only, and depend on the operating conditions of the
network.
When video/audio deteriorates or stops during streaming
Streaming video/audio deteriorates or stops primarily due to network traffic, the
player software or settings, or insufficient processing power in the computer
running the player software.
If such problems occur, check the above.
When the message “Please wait for a while and reconnect.”
appears (for Own)
If Real Player connects to the unit when the ON LINE button of [Live] or [Live/
VOD] of [Output] in the internal server settings (Own) is not pressed, the
following “Please wait for a while and reconnect.” standby clip is played. The
standby clip is not played when the external server (Ext) settings are configured.
This section describes how to offer streaming material to viewers using a Web
page.
Perform these settings on network-ready computers.
Note
Note
Transfer rate 768k/512k 384k/256k 150k/64k/56k
Number of Real Player connections 5 10 20
Placing Streaming Links in a Web Site