Sony Anycast station AWS-G500 Operating Instructions Manual Download

Page: 271 / 316

271

Maintenance

ppen

dix

After the startup screen, press the F10 (Fn+0) key on the keyboard while the
message is displayed indicating that function key input is possible.

The following screen appears.

The “INSTALL” screen appears after a few moments, and “C:Copying
Program files...” appears.

• If the same version is already installed, this object is grayed out, and

excluded from the upgrade.

• The “C:” in “C: Copying Program files...” refers to the “Memory Stick,”

and “D:” and “E:” refer respectively to the upper and lower ports to which
the USB flash memory is connected.

Notes

Summary of Contents for Anycast station AWS-G500





























































































































































































































































































































Search results

Summary of Contents for Anycast station AWS-G500

Reviews:

Related manuals for Anycast station AWS-G500

Brands by name

Popular brands

Sony Anycast station AWS-G500, Operating Instructions Manual

Search results

Summary of Contents for Anycast station AWS-G500

Reviews:

Related manuals for Anycast station AWS-G500

Brands by name

Popular brands