Sony Anycast station AWS-G500, Operating Instructions Manual, Page: 218 / 316

Chap
te
r 3
O
per
at
ion
s
218
Video/Audio Signal Adjustments and Settings
Applying Filters to the Program Output Video
Adjust this setting when the program output video appears blurry or the picture
flickers.
1
Press the MENU button.
2
In the top menu, select [Video Output].
3
1
Select [Filter Mode], and confirm;
2
select [SD Video] or [RGB] from
the submenu, and confirm;
3
select [Soft], [Normal] (when [SD Video] is
selected), or [Sharp], and confirm.
When [SXGA] or [WXGA] is selected for the RGB output signal format
setting, you cannot apply a filter.
• Select [Sharp] when the picture is blurry and [Soft] when the picture
flickers.
• When [Video RGB] is selected for the RGB output signal format setting,
the [SD Video] filter settings is applied.
Adjusting the Audio Input Signal Levels
You can adjust individual channels of the audio signals input to this unit.
1
Press the ACCESS button for the channel fader to which the audio you want
to adjust is assigned.
2
1
In the top menu, select [Input Trim];
2
adjust with the sliders.
3
Press the ESC button to close the ACCESS menu.
You can also close the menu by pressing the same ACCESS button again.
Caution
Notes
Note
PGM OUT NTSC/60Hz
PGM OUT Aspect 4:3
PGM OUT Level
DV OUT
RGB OUT SXGA (60Hz)
Add TC
Add Aspect ID Off
Filter Mode
SD Video Soft
RGB Sharp
B Soft
Normal
Sharp
1 2 3
Chroma Level 100%
Hue 0
˚
Auto Gain Control On
Input Trim 0dB
Filter
EQ Off
1 2