Sony Anycast station AWS-G500 Operating Instructions Manual Download

Page: 48 / 316

Ch
apt

er 2 Prep

ions

Installation/Default Settings

Infrared transmitting range

The range over which the keyboard can operate with infrared control is shown in
the following figure.

Starting and Closing Down the Unit

Starting

Press the

(power) button on the side panel.

The startup screen appears.

When the startup completes, the operation screen appears.

If the display is closed while the unit is operating, the temperature will rise, and
this may cause failure.

Closing down

Press down the

(power) button on the side panel.

The following message appears.

• The last set data is saved.
• If an external hard disk is connected, it is automatically unmounted (page 189).

Caution

Notes

Within 6 feet
6 inches (2 m)

20°

40°

0 - 95°

60°

40°

Summary of Contents for Anycast station AWS-G500





























































































































































































































































































































Search results

Summary of Contents for Anycast station AWS-G500

Reviews:

Related manuals for Anycast station AWS-G500

Brands by name

Popular brands

Sony Anycast station AWS-G500, Operating Instructions Manual

Search results

Summary of Contents for Anycast station AWS-G500

Reviews:

Related manuals for Anycast station AWS-G500

Brands by name

Popular brands