manualshive.com logo in svg

Sony Anycast station AWS-G500, Operating Instructions Manual

Share
Download
Sony Anycast station AWS-G500 Operating Instructions Manual Download Page 189

189

Operations on Files on the External Hard Disk

  Chap

te

r 3 

 O
per

at

ion
s

By pressing the ENTER button while holding down the SHIFT button, you 
can delete all of the cue-up points simultaneously.

3

Press the ENTER button. 

The cue-up point is deleted. 

Disconnecting the External Hard Disk

When disconnecting the external hard disk, use the following procedure to 
disconnect safely.

1

Press the MENU button.

2

In the top menu, select [File Manager].

3

1

 Select [Disconnect], and confirm; 

2

 select the hard disk to disconnect, 

and confirm.

To disconnect all of the hard disks together, select [All]. 

The following message appears.

4

Press the ENTER button, to close the message.

5

Power off the hard disk, and disconnect.

Recovering an External Hard Disk

If as the result of one of the following operations the external hard disk has 
become inaccessible from another computer or from this unit, then carry out disk 
recovery.
• If the hard disk is disconnected without carrying out the proper procedure for 

disconnection on this unit

• If the hard disk is disconnected from a computer without the proper procedure 

for disconnection

1

Press the MENU button.

2

In the top menu, select [File Manager].

Note

Note

Delete

Disconnect

Recover

Rename

All

HDD1

HDD2

HDD3

1

2

Summary of Contents for Anycast station AWS-G500





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands